Diferencia entre revisiones de «Auto/PLC/Addressing»
(→Addressing: Añado supervisor a la tabla para mantener una IP fija para este equipo) |
(→Addressing: Adjust the supervisor LAN) |
||
| Línea 6: | Línea 6: | ||
10.zz.xx.yy | 10.zz.xx.yy | ||
''La red con software será 20.zz.xx.yy'' | |||
zz siempre comienza por 10, pero si xx "desborda" se aumenta en uno el contaje. | zz siempre comienza por 10, pero si xx "desborda" se aumenta en uno el contaje. | ||
| Línea 58: | Línea 60: | ||
|- | |- | ||
|Supervisor | |Supervisor | ||
|229 | |'''''20.zz.xx.'''''229 | ||
|225.255.255.0 | |225.255.255.0 | ||
|- | |- | ||
Revisión actual - 11:20 26 feb 2026
PLC[editar]
Addressing[editar]
El direccionamiento de los equipos debe estar formado por la siguiente nomenclatura:
10.zz.xx.yy
La red con software será 20.zz.xx.yy
zz siempre comienza por 10, pero si xx "desborda" se aumenta en uno el contaje.
xx corresponde al número del proyecto.
yy se calcula en base a la siguiente tabla:
| Device | IP address | Mask |
|---|---|---|
| CPU | 01 | 255.255.255.0 |
| Pn/Pn Coupler | 02 - 05 | 255.255.255.0 |
| Switch | 06-09 | 255.255.255.0 |
| Security Switch | 10 | 255.255.255.0 |
| HMI | 11-15 | 255.255.255.0 |
| Spare | 16-29 | 255.255.255.0 |
| I/O devices | 30-99 | 255.255.255.0 |
| Motion Drivers | 100-200 | 255.255.255.0 |
| Others
(barcode reader, sentron PAC, and others) |
201-228 | 255.255.255.0 |
| Supervisor | 20.zz.xx.229 | 225.255.255.0 |
| DHCP | 230-254 | 255.255.255.0 |